- Permanently installed vane with a diameter of 30 mm
- Measurement of air velocity, air temperature and humidity
- Calculates dew point and wet bulb temperature, wind chill and Beaufort wind force
- Includes single-point averaging, max/min and Hold function
Ideal for rapid measurement at ventilation grilles (air outlets) and for inspecting air conditions – also outdoors: use the testo 410-2 vane anemometer to measure humidity, as well as air velocity and air temperature. Dew point and wet bulb temperature, wind chill or Beaufort wind force: the anemometer can accomplish the calculation of all these parameters at the touch of a button.
The anemometer offers practical accessories and useful functions
We have equipped the vane anemometer with a clip-on protective cap. This offers reliable protection if you are not using the testo 410-2 straight away. During the measurement you can use the fitted wrist strap, which prevents the vane anemometer from falling.
Take a look at the useful functions offered by the anemometer:
Single-point averaging: calculation of the mean air velocity, for example at ventilation grilles (air outlets)
Hold function: enables the current measurement data relating to air velocity, humidity and air temperature to be recorded and compared with each other
Max/min values: displays the minimum or maximum values since the vane anemometer was last switched on or reset
Illuminated display: read off your readings quickly and easily, even if visibility is poor
Selectable units: air velocity: m/s, km/h, fpm, mph, kts and Beaufort; air temperature: °C, °F and wind chill; humidity: relative humidity, wet bulb and dew point temperature
testo 410-2 vane anemometer for measuring air velocity, humidity and air temperature, including protective cap, wrist strap, calibration protocol and batteries.
Technical data/Product specification
|Temperature - NTC|
|Humidity - Capacitive|
|Velocity - Vane|
|General technical data|